Skip to main content
Help
Editing Step 5 —

Notice: You are now editing a prerequisite to the guide you were just viewing. Any changes you make will affect the guide that includes this step.

Step Type:

Drag to rearrange

Carefully slide the edge of an opening pick underneath the flex cable below the microphone.

Twist gently to separate the microphone, while being careful not to strain or damage the flex cable.

If needed, use the point of the spudger to finish separating the microphone from its notch in the front panel. If the microphone remains difficult to separate, apply more heat.

Your contributions are licensed under the open source Creative Commons license.