Skip to main content
Help
Editing Step 10 —

Notice: You are now editing a prerequisite to the guide you were just viewing. Any changes you make will affect all 5 guides that include this step.

Step Type:

Drag to rearrange

There are two cables connecting the screen to the inside of the watch, near the top left corner. Be careful when prying or you may damage these cables.

Pry slightly up on the right side of the screen, to free it from any remaining adhesive.

Pry up on the left to free it as well—but do not attempt to remove the screen as it is still held in place by two cables.

Your contributions are licensed under the open source Creative Commons license.