Skip to main content
Help
Editing Step 5 —

Notice: You are now editing a prerequisite to the guide you were just viewing. Any changes you make will affect all 5 guides that include this step.

Step Type:

Drag to rearrange

Once you've opened the gap enough, insert the tip of an opening pick under the glass.

Slide the pick along the bottom edge to separate adhesive holding the screen to the case.

Be careful not to insert the opening pick too far. Only about 1/8" ( about 3 mm) is necessary, any deeper and you may damage cables.

Your contributions are licensed under the open source Creative Commons license.