Skip to main content
Help
Editing Step 1 —

Notice: You are now editing a prerequisite to the guide you were just viewing. Any changes you make will affect all 6 guides that include this step.

Step Type:

Drag to rearrange

Use the flat end of a spudger to disconnect the flex cable of the left rear camera.

The second rear camera will come out with the motherboard since it is connected on the other side.

You can leave the front facing camera in its place as long as you're careful while removing the motherboard assembly. However if you feel uncertain, carefully remove it with a pair of tweezers.

Your contributions are licensed under the open source Creative Commons license.