Skip to main content
Editing Step 40 —

Step Type:

Drag to rearrange

Install the passenger side seat back in place.

This is similar to the removal step - you need to angle the seat back at about a 45° angle to get it to fit on the pin in the side of the vehicle.

Be sure to get the seat belt fastener on the right side of the seat (I had to remove my seat to fix this because I didn't check the first time I set the seat in place!)

Lay the passenger seat flat.

Install the driver's side seat back in a similar manner (angle at 45° to install on the pin).

Your contributions are licensed under the open source Creative Commons license.