Skip to main content
Editing Step 5 —

Notice: You are editing a prerequisite guide. Any changes you make will affect all 2 guides that include this step.

Step Type:

Drag to rearrange

Locate the blue headlight wire. Use a flathead screwdriver to pry up one side of the clamping teeth and pull the connector off.

Locate the green turn signal wire clamp. Use a flathead screwdriver to push in the tab on the side and pull off the connector.

Now that all connections between the car and the headlight assembly are disconnected, it is safe to remove the headlight assembly from the truck.

Your contributions are licensed under the open source Creative Commons license.