Skip to main content
Editing Step 4 —

Notice: You are now editing a prerequisite to the guide you were just viewing. Any changes you make will affect all 7 guides that include this step.

Step Type:

Drag to rearrange

Insert an opening pick under the display and carefully separate the Force Touch gasket from the display.

Make sure you get right underneath the display. If the the Force Touch gasket splits when lifting the display, or if you separate the gasket layers, you'll also need to replace the Force Touch gasket itself.

Slide the pick around the display to separate the adhesive between the Force Touch gasket and the display.

Don't insert the opening pick deeper than 1/16th of an inch (~2 mm).

Your contributions are licensed under the open source Creative Commons license.