Skip to main content
Help
Editing Step 7 —

Notice: You are editing a prerequisite guide. Any changes you make will affect all 3 guides that include this step.

Step Type:

Drag to rearrange

Carefully disconnect the three antenna coax cables by prying them straight up from the logic board.

Slide your tweezers or the flat end of your spudger underneath each cable until it's near the socket, and then gently twist or pry up to disconnect it.

To reconnect each cable, align the connector directly over its socket, and then press down so it snaps into place.

Your contributions are licensed under the open source Creative Commons license.