Skip to main content
Editing Step 1 —

Notice: You are editing a prerequisite guide. Any changes you make will affect all 10 guides that include this step.

Step Type:

Drag to rearrange

Completely power off and unplug your MacBook Pro before you begin. Close the display and flip the entire laptop upside-down.

Use a P5 Pentalobe driver to remove six screws securing the lower case, of the following lengths:

Four 4.7 mm screws

Two 6.6 mm screws

Note the orientation of the screws as you remove them—they need to be reinstalled at a slight angle.

Throughout this repair, keep track of each screw and make sure it goes back exactly where it came from to avoid damaging your device.

Your contributions are licensed under the open source Creative Commons license.