Skip to main content
Help
Editing Step 8 —

Notice: You are editing a prerequisite guide. Any changes you make will affect all 6 guides that include this step.

Step Type:

Drag to rearrange

Slice through the glue under the lower bezel, being careful not to damage the fingerprint sensor.

Slide or roll your tool past the lower edge of the fingerprint sensor and continue to the other side. Do not pry directly underneath the sensor.

If you plan to re-use the display, be careful not to slice or pry at the display panel. Refer to this image to help identify the glued areas while avoiding the display panel (highlighted in red).

Your contributions are licensed under the open source Creative Commons license.