Skip to main content
Editing Step 14 —

Step Type:

Drag to rearrange

Or you can keep the battery in and only remove the LCD and digitizer from the frame.

This may be easier and cheaper than trying to swap the battery, but you will have to clean off the old adhesive and apply your own adhesive to hold down the new screen.

Be careful of the home button cable if removing the LCD and Digitizer

I forgot to take a picture of this step and the picture shown is of a Galaxy J3 without its LCD assembly. I will upload another if I come across another Moto G6. Please upload your own if you do this step.

Your contributions are licensed under the open source Creative Commons license.