Skip to main content
Help
Editing Step 5 —

Notice: You are now editing a prerequisite to the guide you were just viewing. Any changes you make will affect the guide that includes this step.

Step Type:

Drag to rearrange

In reassembling the wheel to the bike, perform the steps in reverse order.

With the axle all the way into the fork slots, tighten the quick release lever into the fork end securely. It should take a modest amount of force applied to tighten the axle to the fork.

Squeeze the brake calipers together and return the cable noodle back into the holder.

Make sure you go back, and check to make sure its snug so that the wheel has no way of coming back off.

Your contributions are licensed under the open source Creative Commons license.