Skip to main content

Fix Your Stuff

Right to Repair

Store

Help
Editing Step 5 —

Notice: You are editing a prerequisite guide. Any changes you make will affect the guide that includes this step.

Step Type:

Drag to rearrange

Insert the sharp edge of an iFixit opening tool underneath the camera assembly's flex cable, on the opposite side from the front-facing camera.

Use an iOpener or hair dryer as needed to heat the top portion of the display and soften the adhesive securing the flex cable.

Pry up to separate the edge of the flex cable from the back of the display.

Your contributions are licensed under the open source Creative Commons license.