Skip to main content
Help
Editing Step 3 —

Notice: You are editing a prerequisite guide. Any changes you make will affect the guide that includes this step.

Step Type:

Drag to rearrange

Remove the two screws securing the rear camera module cover plate:

One 1.8 mm Phillips screw

One 2.7 mm (nonferrous) standoff screw

Standoff screws are best removed using a standoff screwdriver or bit.

In a pinch, a small flathead screwdriver will do the job—but use extra caution to ensure it doesn't slip and damage nearby components.

Your contributions are licensed under the open source Creative Commons license.