Skip to main content

Fix Your Stuff

Right to Repair


Editing Step 1 —

Notice: You are now editing a prerequisite to the guide you were just viewing. Any changes you make will affect all 41 guides that include this step.

Step Type:

Drag to rearrange

Using the flat end of a spudger, pry the I/O Board connector straight up out of its socket on the logic board. On reassembly, connect this end first as it does not flex.

In a similar fashion, remove the I/O Board connector from its socket on the I/O Board.

Remove the I/O Board cable from the MacBook Pro.

Your contributions are licensed under the open source Creative Commons license.