Skip to main content
Editing Step 1 —

Notice: You are editing a prerequisite guide. Any changes you make will affect all 8 guides that include this step.

Step Type:

Drag to rearrange

Remove the following Phillips screws:

Remove the longer Phillips screw from the middle-rear of the modem shield.

Remove the three identical Phillips screws, two on either side of the EMI fingers, and the remaining one on the right side of the modem shield.

Remove the larger Phillips screw that secures the EMI fingers to the modem board.

Remove the EMI fingers.

Your contributions are licensed under the open source Creative Commons license.