Skip to main content
Editing Step 3 —

Notice: You are now editing a prerequisite to the guide you were just viewing. Any changes you make will affect all 3 guides that include this step.

Step Type:

Drag to rearrange

Use the flat end of a spudger to pry the optical drive ribbon cable connector up off the logic board.

The connector is most easily removed when prying from the top or bottom of the connector.

Bend the optical drive ribbon cable back away from the logic board.

Be very careful when moving the optical drive ribbon cable as it is delicate and easily ripped.

Your contributions are licensed under the open source Creative Commons license.