Skip to main content
Help
Editing Step 1 —

Notice: You are now editing a prerequisite to the guide you were just viewing. Any changes you make will affect all 8 guides that include this step.

Step Type:

Drag to rearrange

To soften the adhesive holding the tablet together, heat up the edges of the glass panel using a heated iOpener on the edge of the device.

We used two iOpeners to open up the tablet. The process is doable with a single iOpener, but would take substantially longer. Alternatively, you can use a heat gun to quickly loosen the adhesive.

Leave the iOpener on edge for two minutes.

Be careful not to burn yourself while handling the hot iOpener. For more information on the iOpener, use the iOpener Instructions Guide.

Your contributions are licensed under the open source Creative Commons license.