Skip to main content

Fix Your Stuff

Right to Repair

Parts & Tools

Editing Step 2 —

Notice: You are editing a prerequisite guide. Any changes you make will affect all 3 guides that include this step.

Step Type:

Drag to rearrange

Line up the small SATA connector so that the short side on the SSD connector matches the short side on the enclosure connector.

Slide the drive in through the front of the enclosure until the SATA connector is fully seated.

The SSD connects with the enclosure in only one way. If the connectors are not lining up, rotate the SSD and try again.

Your contributions are licensed under the open source Creative Commons license.