Skip to main content

Fix Your Stuff

Right to Repair


Editing Step 14 —

Step Type:

Drag to rearrange

Repeat the previous heating and cutting procedure for the long edges of the phone. Do not cut the bottom edge yet.

There are large areas of adhesive holding the display to the frame. Work slowly and methodically to slice through as much of the adhesive as possible.

Leave an opening pick on each edge as you continue to the next to prevent the adhesive from resealing.

The display cable is located just above the midpoint on the right side, and may interfere with your pick if you pry too deeply.

Your contributions are licensed under the open source Creative Commons license.