Editing Step 2 —

Notice: You are editing a prerequisite guide. Any changes you make will affect all 15 guides that include this step.

Step Type:

Drag to rearrange

Carefully insert a putty knife into the crevice in between the top cover and bottom housing. Start on the left side first. Push the blade down until you meet firm resistance (roughly 3/8 of an inch).

Gently enlarge the existing crevice by rotating the putty knife downward and away from the mini.

This is easier if you use two putty knives. Insert the first putty knife at the point on the left side where the gap is largest, press the handle of the knife downward and away from the mini.

Then insert the second knife next to it and push that knife down and out.

Take the first knife out of the mini and put it back in on the other side of the second knife, push down and out.

Repeat this process all the way around the mini.

Your contributions are licensed under the open source Creative Commons license.