Skip to main content
Help
Editing Step 2 —

Notice: You are editing a prerequisite guide. Any changes you make will affect the guide that includes this step.

Step Type:

Drag to rearrange

Remove the following screws from the metal bracket between the rear facing flash and camera windows:

One 2.9 mm standoff screw

Standoff screws are best removed with a standoff screwdriver or standoff driver bit. A small flathead screwdriver can also do the job—but use extra caution to ensure it doesn't slip and damage surrounding components.

One 1.6 mm Phillips screw

One 1.9 mm Phillips screw

Your contributions are licensed under the open source Creative Commons license.