Skip to main content

Fix Your Stuff

Right to Repair

Parts & Tools

Help
Editing Step 12 —

Notice: You are now editing a prerequisite to the guide you were just viewing. Any changes you make will affect all 4 guides that include this step.

Step Type:

Drag to rearrange

If necessary, use a spudger to pry up the left edge of the logic board to separate the solidified thermal paste from the heat sink.

If any resistance is felt when prying up on the logic board, we recommend softening the thermal paste by heating the board with a hair dryer before prying further.

Your contributions are licensed under the open source Creative Commons license.