Skip to main content

Fix Your Stuff

Right to Repair

Parts & Tools

Help
Editing Step 6 —

Notice: You are now editing a prerequisite to the guide you were just viewing. Any changes you make will affect all 4 guides that include this step.

Step Type:

Drag to rearrange

Disconnect both of the following connectors from the logic board:

Left fan cable.

Inverter cable.

Be sure to pull only parallel to the face of the logic board, as pulling up on the socket will break it off the logic board.

When pulling these connectors away from their sockets, it is helpful to use your fingernails to pull on the ears at each side of the connector.

Your contributions are licensed under the open source Creative Commons license.