Skip to main content
Editing Step 6 —

Notice: You are editing a prerequisite guide. Any changes you make will affect all 4 guides that include this step.

Step Type:

Drag to rearrange

Insert a thin blade or pry tool into the camera notch at the top of the display.

The gap where you can safely insert a tool is only about 5 mm wide. If you hit the LCD with your tool, you will damage it.

Use your suction cup and blade or pry tool to widen the gap at the top of the display until you can insert a second tool under the glass, closer to the corner.

Your contributions are licensed under the open source Creative Commons license.