Skip to main content

Fix Your Stuff

Right to Repair

Store

Help

Notice: You are now editing a prerequisite to the guide you were just viewing. Any changes you make will affect all 5 guides that include this step.

Step Type:

Drag to rearrange

After the computer base (#1) is facing up, use a Philips screwdriver to remove the two captive screws (#2) which hold the base panel (#3) down.

Then, use a spudger (#4) to lift up the panel. You can also use your fingernail to lift it as well.

After the front has been lifted up a bit, the non-screw side of the panel will need to be slid forward a little to finish lifting out the base panel from the computer.

Your contributions are licensed under the open source Creative Commons license.