Skip to main content
Editing Step 4 —

Notice: You are editing a prerequisite guide. Any changes you make will affect all 3 guides that include this step.

Step Type:

Drag to rearrange

Peel off the adhesive on the left side of the battery holding the speaker wire down.

Move the battery slightly to gain access to the battery plug, located on the left edge of the battery.

Carefully unplug the battery by pulling the connector towards the battery.

Pull parallel to the battery, not straight up.

Remove the battery.

It is normal for your battery to flex and bend a bit where the wider section meets the narrower section.

Your contributions are licensed under the open source Creative Commons license.