Skip to main content
Editing Step 1 —

Notice: You are now editing a prerequisite to the guide you were just viewing. Any changes you make will affect the guide that includes this step.

Step Type:

Drag to rearrange

Only insert the spudger as deep as 1/16 of an inch to avoid damage.

Use a spudger to carefully pry out the loudspeaker. There is some adhesive underneath so it might be a little bit sticky. You can use an iOpener to loosen it.

Remove the loudspeaker.

When reassembling your phone, apply new adhesive where it's necessary.

Your contributions are licensed under the open source Creative Commons license.