Skip to main content
Editing Step 2 —

Notice: You are editing a prerequisite guide. Any changes you make will affect all 11 guides that include this step.

Step Type:

Drag to rearrange

Insert a plastic opening tool between the display and the case starting at the bottom area of your phone.

Carefully pry the display with its parts out of the case.

Getting the prying tool in will require some effort, be careful not to slide the tool too much or you might slightly damage the housing.

After you pried out the bottom end, use the opening tool to open the clamps on both sides.

Your contributions are licensed under the open source Creative Commons license.