Skip to main content
Help
Editing Step 5 —

Notice: You are now editing a prerequisite to the guide you were just viewing. Any changes you make will affect all 6 guides that include this step.

Step Type:

Drag to rearrange

Repeat the previous four heating and removal steps for the upper glass panel.

During reassembly, remove leftover adhesive from the panels and the rear case. Then clean those areas with high concentration isopropyl alcohol (greater than 90%) and a lint-free cloth. This will ensure proper adhesion of the panels.

Reinstall the panels using a pre-cut adhesive strip or double-sided tape.

Your contributions are licensed under the open source Creative Commons license.