Skip to main content
Help
Editing Step 10 —

Notice: You are now editing a prerequisite to the guide you were just viewing. Any changes you make will affect all 6 guides that include this step.

Step Type:

Drag to rearrange

Repeat the separation and prying process for the other side of the phone.

There is one clip on each side of the phone—make sure both are free before you continue.

Be careful not to separate the bottom edge of the display more than 0.5 inches (13 mm) from the rear case. The display cable is still connected and can be damaged if the bottom of the phone is opened too far.

Your contributions are licensed under the open source Creative Commons license.