Skip to main content

Fix Your Stuff

Right to Repair


Editing Step 4 —

Notice: You are now editing a prerequisite to the guide you were just viewing. Any changes you make will affect all 5 guides that include this step.

Step Type:

Drag to rearrange

Carefully slide the tip of the opening pick down and up the side of the phone, making sure not to cut deeper than 1/16" (1.5 mm).

As you run the pick along the side, you will feel the tip of the pick press against the edge of the OLED panel. That is as far as the pick should go without damaging the panel.

Once you have separated the adhesive, leave an opening pick in the side to keep the adhesive from resealing.

Your contributions are licensed under the open source Creative Commons license.