Using the blunt tweezers, remove the spring via the same method outlined in the previous step.
Firmly grasp the print rail and gently guide it out of the slot in the fuser assembly by pulling away from the printer body.
Because this rail is what guides the printhead, it will be greased. Dress accordingly to avoid unwanted stains.
Because the printhead sits on this rail, be sure to brace the printhead as you retract the print rail to avoid any unwanted damage.
Your contributions are licensed under the open source Creative Commons license.
Insert a new line below
Insert a new line above
Indent current line
Unindent current line
Delete current line
Navigate to next step.
Navigate to previous step.