Skip to main content
Editing Step 5 —

Notice: You are editing a prerequisite guide. Any changes you make will affect the guide that includes this step.

Step Type:

Drag to rearrange

Start to remove the motherboard from the device by lifting the left hand side of the motherboard out from the printer shell with minimal force.

Push the clip's head away from the motherboard to release the right hand side of the motherboard from the printer shell.

Remove the back connector by firmly grasping the tan portion of the connector adjacent to the motherboard and pulling in toward the printer to dislodge the motherboard.

Your contributions are licensed under the open source Creative Commons license.