Skip to main content
Help
Editing Step 2 —

Notice: You are now editing a prerequisite to the guide you were just viewing. Any changes you make will affect all 5 guides that include this step.

Step Type:

Drag to rearrange

Flip over the device again, so that the bottom is facing upwards.

Using a Torx T9 screwdriver, remove the two screws located on opposite sides of the metal casing. One is near the fan vent, and the other is near the power supply vent.

The left screw is 11mm and the right screw is 7.5 mm.

Your contributions are licensed under the open source Creative Commons license.