Skip to main content

Fix Your Stuff

Right to Repair


Editing Step 3 —

Notice: You are editing a prerequisite guide. Any changes you make will affect the guide that includes this step.

Step Type:

Drag to rearrange

Remove the following ten screws securing the heat sink to the logic board:

Two 2.4 mm T5 Torx screws

Six 3.4 mm T5 Torx screws

One 5.2 mm Raised Head T5 Torx screw

One 3.5 mm T5 Torx screw

Your contributions are licensed under the open source Creative Commons license.