Skip to main content
Editing Step 1 —

Notice: You are now editing a prerequisite to the guide you were just viewing. Any changes you make will affect all 2 guides that include this step.

Step Type:

Drag to rearrange

Take your time!

Use a guitar pick, although some have successfully used a fingernail. Don't use a screwdriver as you will damage the case.

Start at one corner and carefully insert your tool, working it along the seam until you hear a click and the case starts to come apart.

Carry on working your way around the case. Be very careful near the buttons.

Eventually the rear case will come away. There aren't any wires attached to the rear case, it just lifts off.

When it's time to reassemble, clip the rear cover back on carefully, making sure to fit the side with the buttons first and being careful to ensure they are positioned correctly.

Your contributions are licensed under the open source Creative Commons license.