Skip to main content

Fix Your Stuff

Right to Repair


Editing Step 5 —

Notice: You are now editing a prerequisite to the guide you were just viewing. Any changes you make will affect all 8 guides that include this step.

Step Type:

Drag to rearrange

Heat the bottom edge with an iOpener for two minutes.

Insert a pick near the right edge where you have already loosened the adhesive.

Carefully guide the pick around the corner.

Slide the pick along the bottom edge to slice through the adhesive.

Do not slice deeper than 8.5 mm (1/3") or you will damage the display cable.

Your contributions are licensed under the open source Creative Commons license.