Skip to main content
Help

Google Pixel XL Display Assembly Replacement

Editing Step 3 —

Notice: You are now editing a prerequisite to the guide you were just viewing. Any changes you make will affect all 8 guides that include this step.

Step Type:

Drag to rearrange

Slide the opening clip across the top edge to slice through the adhesive.

Be sure not to cut deeper than 13 mm (0.5 inches) or you will damage the display.

There's a mesh covering the earpiece speaker on the top edge of the screen. If you don’t have a replacement mesh, take care not to damage or lose this component.

Leave an opening pick in the edge to prevent the adhesive from resealing.

Your contributions are licensed under the open source Creative Commons license.