Use the flat end of a spudger to pry up and loosen the right edge of the daughterboard.
Swing the daughterboard to the left to move it out of its recess.
Do not attempt to remove the daughterboard. It is still attached to the frame.
During reassembly, be sure to route the white antenna cable through the daughterboard notch and wrap the black antenna cable around the screw post.
Your contributions are licensed under the open source Creative Commons license.
Insert a new line below
Insert a new line above
Indent current line
Unindent current line
Delete current line
Navigate to next step.
Navigate to previous step.