Skip to main content
Editing Step 8 —

Notice: You are editing a prerequisite guide. Any changes you make will affect all 7 guides that include this step.

Step Type:

Drag to rearrange

The top edge of the display is secured with both glue and clips.

Slide the opening pick around the top corner of the display, while gently pulling or wiggling the display down in the direction of the Lightning port.

The clips will break if you use too much force. Work carefully and be patient.

Again, don't insert the pick more than a few millimeters—about the width of the display bezel—or you may damage the front panel sensor array.

Slide the pick to the opposite corner and cut any remaining adhesive securing the display.

Your contributions are licensed under the open source Creative Commons license.