Skip to main content
Help
Editing Step 1 —

Notice: You are now editing a prerequisite to the guide you were just viewing. Any changes you make will affect all 22 guides that include this step.

Step Type:

Drag to rearrange

Pull the LCD temperature sensor connector straight up out of its socket on the logic board.

If necessary, de-route the LCD temperature sensor cable from behind the logic board.

When you remove the LCD, check the routing of the LCD temperature display cable. On reinstalling the display, be sure this cable does not block one of the bottom screws for the front bezel.

Your contributions are licensed under the open source Creative Commons license.