Skip to main content
Help
Editing Step 1 —

Notice: You are editing a prerequisite guide. Any changes you make will affect all 13 guides that include this step.

Step Type:

Drag to rearrange

Remove four Phillips (JIS) screws securing the lower display cable bracket to the logic board, of the following lengths:

Two 1.3 mm screws

One 1.4 mm screw

One 2.7 mm screw

Throughout this guide, keep careful track of your screws so that each one goes back where it came from during reassembly. Installing a screw in the wrong place can cause permanent damage.

Your contributions are licensed under the open source Creative Commons license.