Editing Step 6 —

Notice: You are editing a prerequisite guide. Any changes you make will affect all 2 guides that include this step.

Step Type:

Drag to rearrange

Remove the five 4mm T4 screws around the battery assembly with a t4 crew driver.

Lift the battery assembly and gently pry the plug out of its port on the board below with a plastic opening tool.

Press the battery from the back of the battery assembly to remove it with a plastic opening tool until the glue releases the battery.

Do not puncture or bend the battery. Use a small amount of heat to assist in softening the adhesive if necessary.

Your contributions are licensed under the open source Creative Commons license.