Skip to main content
Help
Editing Step 3 —

Notice: You are now editing a prerequisite to the guide you were just viewing. Any changes you make will affect all 3 guides that include this step.

Step Type:

Drag to rearrange

Rest the machine on it's rear panel, so you can access the cable.

Lift up the brown clamp, and pull out the cable

Using a T-10 Torx screwdriver, undo the two screws beneath the display (pictured)

The display remains attached to the scanner assembly for now. If you need to detach it from the scanner - for instance, to operate the printer while it is open - you can detach it once the scanner assembly is removed.

Your contributions are licensed under the open source Creative Commons license.