Skip to main content

Fix Your Stuff

Right to Repair

Parts & Tools


Notice: You are editing a prerequisite guide. Any changes you make will affect all 3 guides that include this step.

Step Type:

Drag to rearrange

Remove the remaining screws around the top of the printer.

Lift the scanner assembly away from the printer.

If you need to detach the display, lay the scanner assembly upside down, lower the display assembly, push it to the right, and then adjust the angle of the display until it drops away from the scanner. Reconnect it to the flat-flex cable, and clip the support back into the rear to hold it. The printer will operate normally without the scanner.

Your contributions are licensed under the open source Creative Commons license.