Skip to main content
Editing Step 2 —

Notice: You are editing a prerequisite guide. Any changes you make will affect all 4 guides that include this step.

Step Type:

Drag to rearrange

Gently wedge the plastic opening tool in between where the display and back panel meet.

Slowly and gently apply force to the plastic opening tool in a downwards motion to loosen the front panel from the back panel.

Rotate the device so that the side is facing up and repeat the previous step for the sides.

Do NOT attempt to wedge the plastic opening tool on the bottom . Once the sides and top are loose you are ready to continue to the next step.

Your contributions are licensed under the open source Creative Commons license.