Skip to main content
Editing Step 8 —

Notice: You are editing a prerequisite guide. Any changes you make will affect all 2 guides that include this step.

Step Type:

Drag to rearrange

Grasping the motherboard by its edges, left the bottom end up at an angle, while keeping the top edge close to the phone.

Use your spudger to pry up the front-facing camera and make sure it separates safely from the frame. The camera can remain attached to the motherboard.

Using your tweezers, grasp the headphone jack flex cable and carefully pull it out of its socket as you remove the motherboard.

Remove the motherboard.

If you feel any resistance, stop. Make sure there are no components still holding the frame to the motherboard.

Your contributions are licensed under the open source Creative Commons license.