Changes to Step #2
Edit by Kristen Gismondi —
Edit approved by Kristen Gismondi
- Before
- After
- Unchanged
Step Lines
| [* red] Disconnect the two wires on the mini card by carefully plucking them upwards by the metal contact points at the terminals. |
| [* icon_caution] Do not pluck the contacts off of the terminals by pulling on the wires, this can damage the cables. |
| [* orange] Remove (1) 2mm screw from the bottom left corner of the mini card with a |
| [* orange] Remove (1) 2mm screw from the bottom left corner of the mini card with a |