Fix Your Stuff

Right to Repair

Store

Changes to Step #2

Edit by Mark —

Edit approved by Mark

Before
After
Unchanged

Step Lines

[* black] Disconnect the two wires on the mini card by carefully plucking them upwards by the metal contact points at the terminals.
[* icon_caution] Do not pluck the contacts off of the terminals by pulling on the wires, this can damage the cables.
[* black] Remove a(1) 2mm screw from the bottom left corner of the mini card with a J1 Phillips screwdriver.
[* black] Remove a(1) 2mm screw from the bottom left corner of the mini card with a J1 Phillips screwdriver.